RF427
RF427
Orderable905 MHz + 920 MHz Spread-Spectrum Radio
Overview
The RF427 is a high-speed 900 MHz serial radio designed for unlicensed operation in Brazil. The RF427 is a frequency-hopping spread-spectrum radio with a configurable transmit-power output of 5 to 250 mW and user-selectable channel masking for improved RF interference immunity. This power-sipping, yet speedy, radio provides a cost-effective way to network data loggers.
The RF427 is part of the RF407 series of radios that includes:
Benefits
- Does not require individual operational license in Brazil
- High-speed serial communication, optimized for PakBus networks
- Low power (< 2 mA idle) during periods of inactivity
- Supports point-to-point with RF retries and point-to-multipoint operations
- Remote diagnostics using PakBus node operations
Specifications
- Radio Type
- Frequency Hopping Spread Spectrum (FHSS)
- Frequency
- 905/920 MHz
- Country Used In
- Brazil
- Transmission Distance
- -Note- Transmission distance assumes line-of-sight and appropriate antenna. Line-of-sight obstructions, RF interference, and antenna type will affect transmission distance.
- Transmission Distance
- Up to 1.61 km (1 mi) with omnidirectional antenna; up to 16.09 km (10 mi) with higher-gain directional antennas at ideal conditions
- Power Output
- 5 to 250 mW
(user-selectable)
- Receiver Sensitivity
- -101 dBm
- Channel Capacity
- Eight 25-channel hop sequences sharing 43 available channels
- Data Rate
- 200 kbps
- Link Throughput
- 105 kbps
(maximum)
- Antenna Connector
- Reverse Polarity SMA (RPSMA) jack
- LEDs
- Red TX/PWR and green RX
- RS-232 Baud Rate
- 1200 to 115200 bps
- CS I/O Modes
- SDC 7, 8, 10, 11, and ME master
- Operating Temperature Range
- -40° to +70°C
- Power
- 9 to 16 Vdc
- Power Connector
- 2.5 mm DC power jack
- Powered Over
- CS I/O or barrel plug
- Maximum Nodes in Network
- 50
- Current Required
- Average Transmit: < 80 mA
(250 mW TX Power)
- Current Required
- Receive: 15 mA
- Current Required
- Sleep: 0.5 mA
(depending on power-saving mode)
- Communication Ports
- RS-232 9-pin D female
- Communication Ports
- CS I/O 9-pin D male
- Communication Ports
- USB Type B jack
- Dimensions
- 11.1 x 6.9 x 2.7 cm
(4.4 x 2.7 x 1.1 in.)
Dimension are from the tip of the antenna connector to the other side of the case, and from the bottom of the case to the top of the DB9 connector jack screw. The width includes the thickness of the screw heads on the screws that hold the case together. - Weight
- 136 g
(4.8 oz) without "Ships With" items
- Weight
- 283.5 g
(10 oz) with "Ships With" items
Certifications
- Brazil (ANATEL)
- 08335-17-10644
(standards in Resolution No. 506)
Accessories
(15)15966
Wall Charger with Barrel Plug
Orderable14291
Field Power Cable, 12 Vdc Plug to Pigtail
Orderable14201
900 MHz 9 dBd Yagi Antenna with Mounting Hardware
Orderable14221
900 MHz 3 dBd Omnidirectional Antenna with Mounting Hardware
Orderable14204
900 MHz 0 dBd 1/2 Wave Omnidirectional Antenna with RPSMA Connector
Orderable15731
900 MHz 0 dBd 1/4 Wave Omnidirectional Antenna with RPSMA Connector
Orderable15730
900 MHz 0 dBd 1/4 Wave Omnidirectional Antenna with RPSMA Connector
Orderable15970
900 MHz 1 dBd Omnidirectional Dipole Antenna with Adhesive Mount
OrderableCOAXRPSMA
LMR195 Antenna Cable with Reverse Polarity SMA and Type N Pin (Male) Connector
OrderableCOAXNTN
RG8 Antenna Cable with 2 Type N Pin (Male) Connectors
Orderable31314
Surge Protection Kit, Type N to RPSMA, 700 to 2700 MHz
Orderable21212
Black Cold Shrink Tape
Orderable18663
Null Modem Cable, 9-Pin PIn (Male) to 9-Pin Pin (Male)
Orderable10873
Serial Data Cable, 9-Pin Socket (Female) to 9-Pin Pin (Male)
Orderable19335
Bulkhead Antenna Cable Installed in Enclosure, Type N to RPSMA
Retired
