SP230SS
SP230SS
OrderableGSAHeated Pyranometer
Lowest cost with a heater.
Overview
The SP230SS pyranometer, manufactured by Apogee, includes a 0.18 W internal heater and an elevated base that allow it to provide solar radiation measurements during the most severe weather. Its small heater draws just 15 mA of current, allowing it to be powered by a small solar panel and battery─even on days with a short duration of daylight and at high latitudes (far away from the equator).
This pyranometer features an IP67-rated, marine-grade 316L connector that allows the user to easily swap sensors for recalibration or to replace damaged cables.
Key Advantages
Heater prevents snow, frost, and dew accumulation
Technical Description
The SP230SS uses a silicon photovoltaic detector mounted in a cosine-corrected head to provide solar radiation measurements. It is calibrated against a Kipp & Zonen CM21 thermopile pyranometer to accurately measure sun plus sky radiation for the spectral range of 360 to 1120 nm. The SP230SS outputs a millivolt signal that Campbell Scientific data loggers can measure.
Note: Sensors calibrated to the 360 to 1120 nm spectral range should not be used under vegetation or artificial lights.
Benefits
- Designed to prevent snow, frost, and dew accumulation
- Heater uses 1/80<sup>th</sup> of the power that other heated pyranometers use, making it ideal for remote battery-powered applications
- Measurement waveband of 360 to 1120 nm
- Compatible with most Campbell Scientific data loggers
- Dome-shaped head prevents water from accumulating on the sensor head
Specifications
- Sensor
- Silicon photovoltaic detector mounted in a cosine-corrected head
- Measurement Description
- Measures sun plus sky radiation
- ISO Classification
- Class C (second class)
- Spectral Range
- 360 to 1120 nm
(wavelengths where response is 10% of maximum)
- Measurement Range
- 0 to 1750 W/m2
(full sunlight ≈1000 W/m2)
- Heater
- 780 Ω, 15.4 mA current drain, 185 mW power at 12 Vdc
- Absolute Accuracy
- ±5% for daily total radiation
- Sensitivity
- 0.2 mV/W/m2
- Calibration Factor
- 5 W/m2/mV
- Cosine Response
- ±5% at 75° zenith angle; ±1% at 45° zenith angle
- Temperature Response
- -0.04 ±0.04% per °C
- Long-Term Stability
- < 2% per year
- Operating Temperature Range
- -40° to +70°C
- Relative Humidity Range
- 0 to 100%
- Compliance with Standards
- 2011/65/EU RoHS Directive
- Compliance with Standards
- 2015/863/EU RoHS Phthalates Amendment
- Diameter
- 3.15 cm
(1.24 in.)
- Height
- 12.75 cm
(5.02 in.)
- Weight
- 142.0 g
(5.01 oz) with 2 m (6.56 ft) cable
Accessories
(7)CM226
Solar Sensor Mounting Stand with Level and Base
OrderableCS301CBL
Replacement Cable for CS301 Pyranometer
RetiredCABLE6PIN-U
26 AWG Six-Conductor Cable with M8 Six-Pin V-Coded Pin (Male) Connector
Orderable18356
Apogee Pyranometer Leveling Base
OrderableCM225
Solar Sensor Mounting Stand
OrderableCM255
Solar Adjustable-Angle Mounting Stand
Orderable39122
DIN Rail Terminal Kit with 2 Terminals and 5 Wires
Orderable
Related Resources
Documents
- Compliance
SP230SS EU Declaration of Conformity
August 2018
View Document - Manual
SP230 and SP230SS Heated Pyranometers
September 2018
View Document - Compliance
CS301 and SP230SS EU RoHS Declaration of Conformity
January 2020
View Document - Brochure
SP230SS Heated Pyranometer
March 2026
View Document - View all documents