LP02-L
LP02-L
RetiredConfigurablePyranometer
Pricing
- Model:
- LP02-L
- Item Number:
- 22127
- Warranty:
- 5 years
- Lead time:
- 14 days
- Compliance:
- requires CM225
Overview
The LP02, manufactured by Hukseflux, is an ISO 9060:2018 spectrally flat Class C (second class) pyranometer that monitors solar radiation for the full solar spectrum range. It produces a millivolt signal that is measured directly by a Campbell Scientific data logger. The LP02 can provide solar radiation measurements for a variety of meteorological applications.
Key Advantages
Blackened thermopile provides full solar spectrum range
Technical Description
The LP02 measures solar radiation with a high-quality blackened thermopile protected by a dome. The blackened thermopile provides a flat spectral response for the full solar spectrum range, which enables the LP02 to be used under plant canopies or lamps, when the sky is cloudy, and for reflected radiation measurements.
The LP02 includes a bubble level, three adjusting screws, and a cable gland. The bubble level and adjusting screws allow the sensor to be leveled without using a leveling base. The gland facilitates cable replacement.
The LP02 produces a millivolt signal that is measured directly by a Campbell Scientific data logger.
Two LP02 pyranometers can be mounted back-to-back to make a low-cost albedometer. Contact Campbell Scientific for more information.
Because the LP02 is a second-class pyranometer, it is acceptable for providing the solar radiation data used in stability estimations (EPA Meteorological Monitoring Guidance for Regulatory Modeling Applications, pages 2-10).
Benefits
- Compatible with most Campbell Scientific data loggers
- Measures reflected solar radiation when inverted
- Provides measurements in direct sunlight, under plant canopies, when the sky is cloudy, and in artificial light
- Includes bubble level and leveling screws, eliminating the need for a separate leveling base and simplifying installation
- Acceptable for providing the solar radiation data used in stability estimations
- Dome protects thermopile and allows water to roll off of it
- Designed for continuous indoor and outdoor use
Specifications
- Sensor
- Blackened thermopile protected by a dome
- Measurement Description
- Monitors solar radiation for the full solar spectrum range
- Spectral Range
- 285 to 3000 nm
- Maximum Irradiance
- 2000 W/m2
- Sensitivity
- 15 µV/W/m2
(nominal)
- Operating Temperature Range
- -40° to +80°C
- Temperature Dependence
- < 0.15% per °C
- ISO Classification
- ISO 9060:2018 spectrally flat Class C (second class)
- Body Diameter
- 7.8 cm
(3.1 in.)
- Dome Diameter
- 3.0 cm
(1.2 in.)
- Height
- 5.9 cm
(2.3 in.)
- Weight
- 363 g
(0.8 lb) with 4.6 m (15 ft) cable
Accessories
(7)CM256
Adjustable Plane and Angle Solar Mounting Stand
OrderableCM225
Solar Sensor Mounting Stand
OrderableCM255LS
Adjustable-Angle Solar Sensor Mounting Stand with Leveling Screws
End of lifeCM255
Solar Adjustable-Angle Mounting Stand
OrderableCM261
Single-Axis Tracker Mounting Stand
OrderableCM275
Albedometer Mounting Kit
Orderable39114
DIN Rail Terminal Kit with 2 Terminals and 3 Wires
Orderable
