CR200X

Datalogger

CR200X

Retired

Datalogger

Pricing

Model:: CR200X
Item Number:: 21937
Warranty:: 3 years

Overview

CR200X Datalogger (-40 to +50C)

The CR200X, our smallest lowest-cost data logger, provides stand-alone operation in harsh, remote environments. It reads input from one or two sensors, then transmits the data using communication peripherals. CRBasic, its full programming language, supports simple or complex programming. Multiple CR200Xs can be configured as a network, or units can be deployed individually.

Key Advantages

Our Smallest,
Lowest-Cost Data Logger

Technical Description

The CR200X has several input channels for measuring a variety of sensors. Gas discharge tubes provide rugged electrostatic discharge protection for the inputs.

The CR200X does not make differential measurements and is not compatible with SDM devices, multiplexers, or thermocouples (refer to the Compatibility information for compatible sensors, peripherals, and software). Recalibration services are not offered for the CR200X datalogger.

Benefits

Ideal applications include wind energy, rural water, water level/flow, aquaculture, water quality
Campbell Scientific’s smallest, lowest cost data logger
Gas Discharge Tube (GDT) protected inputs
Optimal for measuring one or two simple sensors
Makes SDI-12, single-ended analog, pulse, switch closure, and bridge measurements
Battery-backed clock that ensures accurate time is maintained while data logger is disconnected from battery power
Program with LoggerNet, PC400, or Short Cut to fit your setup
PakBus, Modbus, and SDI-12 protocols supported

Specifications

-NOTE-: Note: Additional specifications are listed in the CR200X-Series Specifications Sheet.
Maximum Scan Rate: 1 Hz
Analog Channels: The single-ended analog inputs can also be used as control ports.
Analog Channels: 5 single-ended (no differential)
individually configured
Pulse Count Channels: 2
Switched Excitation Channels: 2 voltage
Digital Ports: Certain digital ports can be used to count switch closures.
Digital Ports: 2 I/O
Communication Ports: 1 RS-232
Switched Battery Port: 1
Input Voltage Range: 0 to 2500 mV
Analog Voltage Accuracy: ±(0.25% of reading + (1.2 mV)x(offset))
at -40° to +50°C
Analog Voltage Resolution: 0.6 mV
A/D Bits: 12
Operating Temperature: -40° to +50°C
Power Requirements: 7 to 16 Vdc
Typical Current Drain: ~0.2 mA
(quiescent)
Typical Current Drain: ~3 mA
(active)
Clock Accuracy: 8.2 min./month
(@ -40° to +50°C)
Clock Accuracy: 1 min./month
(@ +25°C)
Protocols Supported: PakBus (leaf node only), SDI-12
CE Compliance Standards to which Conformity Is Declared: IEC61326:2002
Warranty: 3 years
Dimensions: 14.0 x 7.6 x 4.8 cm
(5.5 x 3.0 x 1.9 in.)
Weight: 242 g
(8.5 oz)

Memory

Final Storage: 512 kB of flash memory for approximately 125,000 data points
Operating System: 106 kB of flash memory
Intermediate Storage: 8 kB of SRAM for communication buffers, calculations, variables, etc.

CR200X

CR200X

Pricing

Overview

Key Advantages

Technical Description

Benefits

Specifications

Memory

Accessories

Related Resources

Case Studies

Documents

Videos and Tutorials