31317
Surge Protection Kit, Type N to SMA, 700 to 2700 MHz
31317
OrderableSurge Protection Kit, Type N to SMA, 700 to 2700 MHz
Overview
Surge Protection Kit, Type N to SMA, 700- 2700MHz, 45cm (18 Inch)
The 31317 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector. This kit includes:
- Bi-directional coaxial RF protector with hardware, suitable for 700 to 2700 MHz
- Flange mounting bracket
- 18 in. Type N to SMA coaxial jumper
- 24 in. ground wire assembly
Benefits
- Superior coil inductor surge performance design
- Weatherproof when installed
Specifications
Coaxial Jumper
- Connector 1
- Type N plug
- Connector 2
- SMA plug
- Cable
- RG174/U
- Length
- 45.7 cm
(18 in.)
Surge
- Frequency
- 700 to 2700 MHz
- Connectors
- Type N jack
- Mounting
- Bulkhead mount
- Operation
- DC block
(RF only)
- Operation
- Bi-directional
(Connectors are not antenna/radio specific.)
- Insertion Loss
- < 0.1 dB
- Maximum Surge
- IEC 61000-4-5 8/20 μs waveform
- Maximum Surge
- 40 kA
(max)
- Maximum Surge
- 20 kA
(multiple)
- Temperature
- -50° to +85°C
- Materials
- Tri-plated brass body, PTFE dielectric, tri-metal center pins, SS 5/8-24 hex nut, SS 5/8 lock washer, silicon O-ring
- Standards
- CE compliant, RoHS compliant, IEC 60529 IP67, Bellcore #TA-NWT-000487
- Body Diameter
- 3.0 cm
(1.18 in.)
- Type N Connector Length
- 2.41 cm
(0.95 in.)
- Total Length
- 9.17 cm
(3.16 in.)
Flange Mount
- Material
- Aluminum with stainless-steel screws, nuts, and washers
- Dimensions
- 3.81 x 2.54 x 2.85 cm
(1.5 x 1.0 x 1.12 in.)
Ground Wire
- Wire Type
- 12 AWG stranded with PVC jacket
- Connector
- 5/8 crimp ring lug, soldered
- Length
- 61 cm
(24 in.)
