TempVue 10

Name: TempVue 10
Brand: Campbell Scientific
SKU: 41014
Availability: InStock

Pt100 Analog Temperature Sensor

TempVue 10

Orderable

Pt100 Analog Temperature Sensor

Pairs with the Aspen10 and has more standardized cabling and connectors.

Pricing

Qty

Model:: TempVue 10
Item Number:: 41014
Warranty:: Two years
Lead time:: 21 days

Overview

TempVue10-ST PT100 Analog Air Temperature RTD Sensor (-40 to +60C), 86cm (33 Inch) Cable w/M12 8-Pin Male A-Coded Connector -ST Single Point Calibration

The TempVue™10 represents the next generation of air-temperature measurement sensors, meeting all relevant World Meteorological Organization (WMO) temperature recommendations.

Designed with the customer in mind, the TempVue 10 easily interfaces with Campbell Scientific or third-party data loggers and fits a wide range of passive solar radiation shields. The sensor comes with a short, attached cable and terminates with an M12 connector, which provides exceptional convenience, environmental protection, and data integrity for use in a variety of applications.

Key Advantages

A Market-Leading, Analog, Ambient Air Temperature Sensor
Easy to use

Technical Description

The sensor consists of a wire-wrapped, four-wire Pt100 Resistance Temperature Detector (RTD) element encapsulated in an epoxy-filled, stainless-steel housing. The thin yet robust housing, combined with the Pt100 sensing element, result in a sensor that meets the WMO guideline for step response time (20 seconds) with an ambient wind speed of only 1 m/s (3.3 ft/s).

The TempVue 10 has a maximum measurement uncertainty of only 0.3 Kelvin over the entire measurement range of -80° to +60°C, with only 0.1 Kelvin over the most common temperature range of -40° to +40°C.

Benefits

Meets WMO step change response time at 1 m/s (3.28 ft/s)
Maintains high measurement stability over both time and temperature
Incredibly easy to install or remove for calibration checks
Highly durable, providing sensor element protection in even the harshest environmental conditions
Able to be wired with a two-, three-, or four-wire Platinum Resistance Thermometer (PRT) configuration
Allows for cable length adjustments without the need for calibration changes
Includes calibration certificate

Specifications

Sensor Description: Platinum Resistance Thermometer
(Pt100)
Measurement Uncertainty: ±0.1 Kelvin over -40° to +40°C
(-40° to +104°F) range
Measurement Uncertainty: ±0.3 Kelvin over -80° to +60°C
(-112° to +140°F) range
Temperature Measurement Range: -80° to +60°C
(-112° to +140°F)
Time Constant in Air: 20 s
for a wind speed of 1 m/s (3.3 ft/s)
Resolution: Three decimal places
(0.001°C)
Connector Type: M12
(to extend beyond 1 m [3 ft] standard cable length)
Ingress Protection: IP67
Probe Diameter: 1.9 cm
(0.75 in.) maximum
Probe Length: 12.1 cm
(4.75 in.) tip to end of cable gland
Extended Probe Length: 18.1 cm
(7.125 in.) tip to end of extender piece
Total Length: 97.16 cm
(38.25 in.) tip to end of connector
Weight: 70 g
(0.15 lb) for probe with extender piece, including standard 1 m (3 ft) cable with M12 connector