Resource Center
LevelVue B10 OS
Software applications, data logger operating systems, firmware, and drivers for Campbell Scientific products
LevelVue B10 OS
v2.3Current LevelVue B10 Operating System. The Device Configuration Utility is used to send this Operating System to the LevelVue B10.
Revision History
v2.3May 1, 2026
- Added retries on some measurements when they fail.
- Added toggling chip select around ADC accesses.
- Added a compressor soft-start option to address units in the field that were running into a hardware current limit on compressor startup.
v2.2April 24, 2025
- Fixed an issue with a 50PSI bubbler at a similar depth, where the pump wasn't activating, causing water to flow up the LevelVue line.
- Fixed an issue when using a 50PSI bubbler at a similar depth, where the pump wasn't activating, allowing water to flow up the line of the LevelVue.
v2.1November 3, 2021
- MajorFixed a condition where the compressor could stay in the ON state. If this were to happen, power cycling the system would correct the issue.
- MajorFixed a condition where the compressor could stay in the ON state. Power cycling the system would correct the issue.