SP20R-PW

20 W Solar Panel with Regulator for PWENC
SP20R-PW

SP20R-PW

End of life

20 W Solar Panel with Regulator for PWENC

Model:
SP20R-PW
Item Number:
22115
Warranty:
1 year
Lead time:
21 days

Overview

SP20R-PW 20W Regulated Solar Panel, 20ft Cable for PWENC

The SP20R-PW is a specially cabled 20 W solar panel. It is often used for system configurations that have higher-than-average power requirements, or in higher elevation and latitude locations. The SP20R-PW is very similar to the SP20-PW except that it contains an on-board voltage regulator, allowing the panel to supply power directly to a user-supplied battery mounted inside a Campbell Scientific prewired enclosure (PWENC).

Technical Description

The 6.1 m (20 ft) cable on the SP20R-PW terminates in a connector that can connect to a PWENC. The connector in the enclosure then leads to a power supply or battery base to recharge the battery and allow unattended operation of systems in remote locations, far from AC electrical sources.

Please note that the SP20R-PW has a 2-mA continuous current drain (meaning that it consumes a small amount of power from the connected battery at night).

Included mounting hardware consists of two part no. 17492 U-bolt and matching nuts. The U-bolt has a 5.398 cm (2.125 in.) space between the U-bolt legs. This hardware allows the solar panel to be mounted to a 0.75-1.5 in. IPS pipe [25.4-50.8 cm (1-2 in.) OD].

Benefits

  • Supplies electrical power in locations where ac power is unreliable, expensive, or not available
  • On-board voltage regulator allows direct connection to a user-supplied external battery
  • Quick, secure connection to Campbell prewired enclosures for more efficient setup

Specifications

-NOTE-
Solar panel characteristics assume 1 kW m-2 illumination and 25°C solar panel temperature.

Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases.

Maximum Peak Power
20 W
Guaranteed Minimum Peak Power
18 W
Current at Peak
1.19 A
Voltage at Peak
16.8 V
Current Drain
2 mA

(continuous)

Cable Length
6.1 m

(20 ft)

Dimensions
50.0 x 42.2 x 5.1 cm

(19.7 x 16.6 x 2 in.)

Weight
6.2 kg

(13.6 lb)

Related Resources

Connect With Us

envelope icon
Phone Numbers
General: (435) 227-9000
location icon
Corporate Address
815 W 1800 N
Logan, UT 84321
send icon
Email Address
sales@campbellsci.com

As a trusted leader in measurement systems for more than 50 years, our top priority at Campbell Scientific has always been to provide the most accurate, reliable data for research and industry.