Raven II
Airlink CDPD Cellular Digital Modem
No image available
Raven II
End of lifeAirlink CDPD Cellular Digital Modem
Pricing
Pricing temporarily unavailable.
- Model:
- Raven II
- Item Number:
- RAVENII
- Lead time:
- 21 days
Overview
The Raven II was configured for or AT&T digital cellular networks. It supported telecommunications between a data logger and a cellular digital packet data (CDPD) network. CDPD modems were IP based, which required the cellular provider to assign an IP address.
Specifications
- Transmit Power
- 600 mW
- Transmit
- 824 to 849 MHz
- Receive
- 869 to 894 MHz
- Data Rates
- 9.2 kbps via TCP/IP, 1,200 to 38,400 bps via serial interface
- Input Voltage
- 9 to 30 Vdc
- Input Current
- 30 to 450 mA
- Typical Current Drain @ 12 Vdc
- 60 mA
(while receiving)
- Typical Current Drain @ 12 Vdc
- 280 mA
(during transmission)
- Operating Temperature Range
- -30° to +70°C
(with transmissions limited to a 10% duty cycle above 60°C)
- Humidity
- 5% to 95%
(non-condensing)
- RF Protocol
- CDPD 1.1
- Serial Interface
- RS-232, DB-9F
- RF Antenna Connector
- 50 ohm TNC female
- Serial Protocols
- AT Commands, SLIP, PPP
- Status LEDs
- Power, Channel Acquired, Link Status, Network Registration, RSSI, Transmit/Receive, Block Errors