CM106K
CM106K
End of lifeCM106 Tripod Kit
Pricing
- Model:
- CM106K
- Item Number:
- 27147
- Lead time:
- 21 days
Overview
The CM106K Tripod Kit contains the hardware necessary to construct a 3 m (10 ft) tripod. It is designed to save shipping cost by having the customer obtain steel pipe and a grounding rod locally. The kit contains the parts to assemble the pipes into a tripod, including feet, joints, bolts and nuts, lightning rod, and other parts. The customer obtains lengths of steel pipe and a copper ground rod from a local supply house. The CM106K is primarily intended for overseas shipments.
Specifications
- Vertical Load Limit
- 45 kg
(100 lb)
- Leveling Adjustment
- Clamp brackets on each leg adjust individually.
- Maximum Slope Angle
- 22° or 40% grade
(Maximum slope angle assumes that one leg points downhill while the other two legs point uphill.)
- Portability
- Collapsible to 23 cm (9 in.) diameter by 2.54 m (100 in.) length.
- Leg Base
- 150 x 89 mm with one 21 mm hole for stakes
(6 x 3.5 in. with one 0.84 in. hole for stakes)
- Measurement Height
- 3.0 m
(10 ft)
- Mast Outer Diameter
- 48 mm
(1.90 in.)
- Base Diameter
- 3.4 m
(11 ft)
- Weight with Mast
- 30 kg
(67 lb)
Maximum Allowable Wind
- -NOTE-
- Allowable sustained wind values assume the following:
Mast and leg components are made of steel (minimum yield strength of 36 ksi [248 MPa]) and fabricated according to the specified design.14 x 16 in. enclosure at mast base10.5 x 16.5 in. solar panel at mast baseCrossarm and sensors (1.4 ft2 projected area) at mast topAdequate ground anchors (stakes can pull out at lower wind speeds)
- Sustained Wind
- 36 m/s
(80 mph) unguyed
- Sustained Wind
- 51 m/s
(115 mph) guyed
- Wind Gust
- 46 m/s
(104 mph) unguyed
- Wind Gust
- 67 m/s
(150 mph) guyed