32262
32262
Orderable2 dBd 4G/3G Multiband Omnidirectional Antenna with Mounting Hardware
Overview
The 32262 is an omnidirectional antenna with mounting bracket that is ideally suited for use with 4G and 3G cellular gateways. The mounting bracket attaches to a mast or crossarm, and it serves as the antenna ground plane. The antenna has an N type (female) threaded permanent stud for easy mounting to the included bracket or through an enclosure wall. A coaxial cable, sold separately, is required to connect this antenna to the inline surge suppression or radio antenna jack.
Note: In the image, the antenna and mounting bracket are shown attached to a pole.
Specifications
Antenna
- Type
- Omnidirectional, multiband
- Use
- 4G/3G cellular, outdoor or indoor, fixed location or mobile
- Frequency Range
- 698 to 960 MHz
- Frequency Range
- 1710 to 2700 MHz
- Nominal Peak Gain
- 1.4 dBd
(@ 698 to 960 MHz)
- Nominal Peak Gain
- 3.3 dBd
(@ 1710 to 1990 MHz)
- Nominal Peak Gain
- 2.4 dBd
(@ 2100 to 2700 MHz)
- VSWR
- < 2.5:1
- Radome Material
- High heat ABS
- Polarization
- Vertical
- Impedance
- 50 ohm
- Maximum Input Power
- 100 W
- Input Connection
- Type N, threaded, female
- Operating Temperature
- -40° to +85°C
- Dimensions
- 8.38 x 3.66 cm
(3.3 x 1.44 in.)
Mount/Ground Plane
- Material
- Clear anodized aluminum
- Hardware
- 5/16-18 in. x 2.125 in. stainless-steel U-bolt
(with brass nuts and stainless-steel flat and lock washers)
Accessories
(4)31317
Surge Protection Kit, Type N to SMA, 700 to 2700 MHz
OrderableCOAXSMA
LMR195 Antenna Cable with SMA and Type N Pin (Male) Connector
Orderable31315
Bulkhead Surge Protection Installed in Enclosure, Type N to SMA, 700 to 2700 MHz
Retired21847
Cellular Phone Antenna Cable, Type N Pin (Male) to SMA
Orderable
